Firmware Haier G31T 100% Work

Download Firmware Haier G31T Shaped Rar / Zip Then Extract In PC, Then Install USB Driver In PC Then Open and Run Flashtool.Firmware This You Can Use To Overcome Bootloop, Forgotten Patterns, Hank etc ...

Download Firmware Haier G31T, Haier G31T Stock ROM Firmware File You Can Use To Overcome Bootloop, Forget Patterns, Hank, Restart,Haier G31T Died, Flash Fail.Please Download and Use This File Well.

Firmware Haier G31T

File Name : Haier_G31T_MT6580_06072016.zip
Size           : 789.26 MB
How To Flash: Follow Tutorial Flash



How to Flash Haier G31T Using Sp Flashtool: 
  • Download Firmware Haier G31T, Then Extract On Your Computer / PC Next Install Usb Driver 
  • Then Open And Run Flashtool, On Scatter Load Tab In Flashtool Click Then Enter Firmware MT65XX_Android_Scatter.txt Which Is In The Folder Result Extract 
  • Next Click Download In Flashtool, Make Sure All Unchecked, Unless Preloader Should Not Be Dropped, Unless You Have The Original Firmware Backup From Your Haier G31T 
  • Then Prepare the Phone In OFF Condition 
  • Next In Off Condition Connect Phone To PC / Computer Using Usb Cable, Make Sure Driver Is Installed In Computer To Devices Detected By Flashtool Flashing Process / Re-Install Ongoing, 
  • Wait Until Process Reinstall / Flashing Completed 
  • If It's Done Then Will Appear Notification Download OK On Flashtool In Green Colored Box 
  • Unplug Your Haier G31T, Then Try to Turn On, For Initial Boot Usually Older Because New In Flash / Reinstall So Naturally, Just Wait Until Booting Done.


EmoticonEmoticon